Replacing Old Comb – The Bailey Method And The Shook Swarm Technique

This information is taken from Information Sheets prepared by John Hauxwell, former Chair of the North London Beekeepers. Many thanks!

Bailey Method

All new/additional hive parts should be new and/or sterilized.

1. Remove all unoccupied peripheral brood combs, without disturbing the brood nest. Insert dummy boards tight to each side of the brood nest. (wax & any left over stores can be recovered)
2. Place on top of the old brood box, another brood box with new brood frames with fresh foundation (the same number as there are existing below) with dummy boards each side. The new frames must be exactly above the old ones.
3. Feed the bees with thick sugar syrup in a contact feeder until there is a nectar flow. This helps the bees to produce wax for comb building. (small quantities at a time to avoid too much syrup storage).
4. The bees should now start to expand their nest upwards into the new frames, and extra frames can be added to accommodate the expansion.
5. Once the queen is laying well in the upper box, separate the 2 brood boxes with a queen excluder, ensuring that the queen is in the upper box!
6. 21 days later, the worker brood will have hatched out from the original frames, so the old brood box & queen excluder can be removed. Put the new brood box on a new/clean floor. (it is not worth the while sterilizing the combs or trying to recover the wax)
7. Keep feeding if necessary.
8. Now revert to your normal beekeeping practices.

a. new comb = healthy comb
b. mimics the natural wild colony process of new comb building
c. improved colony build up
d. good for the wax builders & can delay swarming
e. end product = a vigorous, healthy colony

The Shook Swarm Technique

A colony must be strong enough to withstand a Shook Swarm, i.e., at least six brood frames of bees and have a satisfactory laying queen. The colony must be able to draw out the foundation, and therefore the ideal months are from late April to June.
The beekeeper must have ready for use clean/sterilised equipment for a new hive. This is your opportunity to give the colony a clean hive to start the season, similar to the hiving of a natural swarm.

1. Move the colony a short distance from its original position.
2. Place a clean brood chamber with clean frames with foundation, with a clean floor and entrance block, on the original position. Use a queen excluder between the floor and chamber to prevent the queen from absconding. Find the queen, and cage her for safekeeping during this manipulation.
3. Remove approximately 3 central frames of foundation from the new hive.
4. Shake all bees from the original hive into the center (do this by lowering the frames, one at a time, into the gap and shaking all the bees into the depth of the chamber) and brush any remaining bees.
5. Put the old frames without bees into a bag for destruction later. In foundation replacement & swarming situations, it is a good idea to put 1 original frame of open brood into the new chamber.
6. When all old frames have been shaken into the new chamber, replace the 3 frames with foundation gently into place, then carefully release the queen into the brood chamber.
7. Feed the bees with sugar syrup until the foundation is at least 75% drawn out. If there is already honey in a super or good nectar flow, feeding may not be necessary, but be careful.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s